홈 / 제품 / JAC 4x2 5 m³ Compactor Garbage Truck
주문 제작 특수 차량

JAC 4x2 5 m³ Compactor Garbage Truck

Compact rear-loader garbage truck on a JAC 4×2 chassis: 5 m³ arc-shaped Q345 steel body, push plate with back pressure for two-way compaction (about 1:2 to 1:3), 16 MPa hydraulics with PLC control, and a 109 hp HFC4DA1-1B diesel engine on a 3308 mm wheelbase.

옵션: LHD or RHD, engine power and emission standard to suit your market.

Rear loader: 240 L / 660 L bin lifter, bucket, swing arm or manual loading, chosen to match your collection method.

문서 내보내기: 모든 트럭에 대해 차량 적합성 인증서, 섀시 인증서, CCC 인증서 및 공장 시험 보고서를 제공해 드립니다. 딜러 및 대리점의 문의를 환영합니다 — 저희 대리점이 되어 주세요.

5 m³ Body volume
109 hp 엔진 출력
16 MPa Working pressure
단순 참고용 사양입니다. 최종 섀시 및 차체 사양은 주문 건별로 확정됩니다.
맞춤형 견적 요청하기

섀시 및 차체 사양

🚛 섀시

섀시 JAC, 4x2
택시 Row-and-a-half cab
엔진 HFC4DA1-1B diesel, 2771 cc, 109 hp
기어박스 LC5T255M3, 5-speed manual
축간 거리 3308 mm
GVW 4480 kg
Chassis weight 2330 kg
Axle capacity 2000 kg front / 5000 kg rear
타이어 7.00R16, dual rear tyres
브레이크 Air brakes
조향 Power steering
Cab equipment Air conditioning, power windows; central locking optional
옵션 좌측 핸들(LHD) 또는 우측 핸들(RHD); 엔진 출력과 배기가스 배출 기준은 선택 가능

⚙️ Compactor Body

Body volume 5 m³
Body Arc-shaped compactor body
Steel WISCO Q345 high-strength manganese steel
판 두께 Side / floor 4/5, 3/4 or 3/3 mm
Compaction Push plate with back pressure, two-way compaction
Compression ratio About 1:2 to 1:3
Leachate tank Side or rear sewage tank under the hopper
Working pressure 16 MPa
Hydraulics Changyuan or Wanye gear pump, Zhongmei valves and cylinders
Control PLC with CAN bus, one-key cycle
Rear loader Bin lifter, bucket, swing arm or none (optional)

Compaction & Hydraulics

Compactor body

  • Arc-shaped body resists deformation under load
  • WISCO Q345 high-strength manganese steel
  • Built-in push plate with back pressure squeezes waste tight
  • Compression ratio of about 1:2 to 1:3 carries more waste per trip

Hydraulic system

  • Changyuan or Wanye gear pump
  • Zhongmei multi-way valve and cylinders
  • Rated working pressure 16 MPa

Electrical control

  • PLC control with CAN bus
  • Manual, single-cycle or multi-cycle operation
  • Controls in the cab and at the rear
  • Wireless remote control (optional) for unloading and draining

Rear Loading Options

Choose by collection method

  • Bin lifter for 240 L / 660 L plastic bins, the most common choice for housing estates
  • Bucket type (open or fully sealed) for loose waste
  • Swing arm for large steel bins at fixed collection points
  • No lifter: manual loading for transfer work only

Clean operation

  • Side or rear leachate tank under the hopper
  • Reduces dripping on the road during transport
  • Compact 4x2 chassis for narrow streets and residential areas

배송

리드 타임 및 수출

  • 제작 기간 약 40일
  • 섀시가 재고가 있을 경우 약 15일 소요됩니다.
  • 출고 전 트럭의 사진 및 동영상
  • 48시간 이내에 견적 및 구성 제공

용량이 더 필요하신가요? 다음을 확인해 보세요. SHACMAN 8 m³ compactor, 그 ISUZU GIGA 15 m³ compactor, 또는 전체 보기 compactor garbage trucks.

오류입니다: 콘텐츠는 보호됩니다 !!!
연락하기