Início / Produtos / JAC 4x2 5 m³ Compactor Garbage Truck
VEÍCULOS ESPECIAIS CONSTRUÍDOS À MEDIDA

JAC 4x2 5 m³ Compactor Garbage Truck

Compact rear-loader garbage truck on a JAC 4×2 chassis: 5 m³ arc-shaped Q345 steel body, push plate with back pressure for two-way compaction (about 1:2 to 1:3), 16 MPa hydraulics with PLC control, and a 109 hp HFC4DA1-1B diesel engine on a 3308 mm wheelbase.

Options: LHD or RHD, engine power and emission standard to suit your market.

Rear loader: 240 L / 660 L bin lifter, bucket, swing arm or manual loading, chosen to match your collection method.

Documentos de exportação: Certificado de conformidade do veículo, certificado do chassis, certificado CCC e relatório de ensaio de fábrica disponíveis para cada camião. Concessionários e agentes são bem-vindos — Torne-se nosso revendedor.

5 m³ Body volume
109 hp Engine power
16 MPa Working pressure
Apenas configuração de referência. As especificações finais do chassis e da carroçaria são confirmadas para cada encomenda.
SOLICITE UM ORÇAMENTO PERSONALIZADO

Especificações do chassis e da carroçaria

🚛 Chassis

Chassis JAC, 4x2
Cabine Row-and-a-half cab
Motor HFC4DA1-1B diesel, 2771 cc, 109 hp
Caixa de velocidades LC5T255M3, 5-speed manual
Distância entre eixos 3308 mm
GVW 4480 kg
Chassis weight 2330 kg
Axle capacity 2000 kg front / 5000 kg rear
Pneus 7.00R16, dual rear tyres
Brakes Air brakes
Direção Power steering
Cab equipment Air conditioning, power windows; central locking optional
Options LHD or RHD; engine power and emission standard optional

⚙️ Compactor Body

Body volume 5 m³
Body Arc-shaped compactor body
Steel WISCO Q345 high-strength manganese steel
Espessura da chapa Side / floor 4/5, 3/4 or 3/3 mm
Compaction Push plate with back pressure, two-way compaction
Compression ratio About 1:2 to 1:3
Leachate tank Side or rear sewage tank under the hopper
Working pressure 16 MPa
Hydraulics Changyuan or Wanye gear pump, Zhongmei valves and cylinders
Control PLC with CAN bus, one-key cycle
Rear loader Bin lifter, bucket, swing arm or none (optional)

Compaction & Hydraulics

Compactor body

  • Arc-shaped body resists deformation under load
  • WISCO Q345 high-strength manganese steel
  • Built-in push plate with back pressure squeezes waste tight
  • Compression ratio of about 1:2 to 1:3 carries more waste per trip

Hydraulic system

  • Changyuan or Wanye gear pump
  • Zhongmei multi-way valve and cylinders
  • Rated working pressure 16 MPa

Electrical control

  • PLC control with CAN bus
  • Manual, single-cycle or multi-cycle operation
  • Controls in the cab and at the rear
  • Wireless remote control (optional) for unloading and draining

Rear Loading Options

Choose by collection method

  • Bin lifter for 240 L / 660 L plastic bins, the most common choice for housing estates
  • Bucket type (open or fully sealed) for loose waste
  • Swing arm for large steel bins at fixed collection points
  • No lifter: manual loading for transfer work only

Clean operation

  • Side or rear leachate tank under the hopper
  • Reduces dripping on the road during transport
  • Compact 4x2 chassis for narrow streets and residential areas

Delivery

Lead time & export

  • Production about 40 days
  • About 15 days when the chassis is in stock
  • Photos and videos of your truck before shipment
  • Quotation and configuration within 48 hours

Need more capacity? See the SHACMAN 8 m³ compactor, o ISUZU GIGA 15 m³ compactor, ou ver tudo compactor garbage trucks.

erro: O conteúdo está protegido !!!
Entrar em contacto