Home / Producten / JAC 4x2 5 m³ Compactor Garbage Truck
OP MAAT GEMAAKTE SPECIALE VOERTUIGEN

JAC 4x2 5 m³ Compactor Garbage Truck

Compact rear-loader garbage truck on a JAC 4×2 chassis: 5 m³ arc-shaped Q345 steel body, push plate with back pressure for two-way compaction (about 1:2 to 1:3), 16 MPa hydraulics with PLC control, and a 109 hp HFC4DA1-1B diesel engine on a 3308 mm wheelbase.

Options: LHD or RHD, engine power and emission standard to suit your market.

Rear loader: 240 L / 660 L bin lifter, bucket, swing arm or manual loading, chosen to match your collection method.

Exportdocumenten: Voor elke vrachtwagen zijn een conformiteitscertificaat, een chassiscertificaat, een CCC-certificaat en een fabrieksproefverslag beschikbaar. Dealers en agenten zijn van harte welkom — Word onze dealer.

5 m³ Body volume
109 hp Motorvermogen
16 MPa Working pressure
Alleen ter referentie. De definitieve specificaties van het chassis en de carrosserie worden per bestelling bevestigd.
VRAAG EEN OFFERTE OP MAAT AAN

Specificaties chassis en carrosserie

🚛 Chassis

Chassis JAC, 4x2
Cabine Row-and-a-half cab
Motor HFC4DA1-1B diesel, 2771 cc, 109 hp
Versnellingsbak LC5T255M3, 5-speed manual
Wielbasis 3308 mm
GVW 4480 kg
Chassis weight 2330 kg
Axle capacity 2000 kg front / 5000 kg rear
Banden 7.00R16, dual rear tyres
Remmen Air brakes
Stuurinrichting Stuurbekrachtiging
Cab equipment Air conditioning, power windows; central locking optional
Options LHD or RHD; engine power and emission standard optional

⚙️ Compactor Body

Body volume 5 m³
Hoofdtekst Arc-shaped compactor body
Steel WISCO Q345 high-strength manganese steel
Plaatdikte Side / floor 4/5, 3/4 or 3/3 mm
Compaction Push plate with back pressure, two-way compaction
Compression ratio About 1:2 to 1:3
Leachate tank Side or rear sewage tank under the hopper
Working pressure 16 MPa
Hydraulics Changyuan or Wanye gear pump, Zhongmei valves and cylinders
Control PLC with CAN bus, one-key cycle
Rear loader Bin lifter, bucket, swing arm or none (optional)

Compaction & Hydraulics

Compactor body

  • Arc-shaped body resists deformation under load
  • WISCO Q345 high-strength manganese steel
  • Built-in push plate with back pressure squeezes waste tight
  • Compression ratio of about 1:2 to 1:3 carries more waste per trip

Hydraulic system

  • Changyuan or Wanye gear pump
  • Zhongmei multi-way valve and cylinders
  • Rated working pressure 16 MPa

Electrical control

  • PLC control with CAN bus
  • Manual, single-cycle or multi-cycle operation
  • Controls in the cab and at the rear
  • Wireless remote control (optional) for unloading and draining

Rear Loading Options

Choose by collection method

  • Bin lifter for 240 L / 660 L plastic bins, the most common choice for housing estates
  • Bucket type (open or fully sealed) for loose waste
  • Swing arm for large steel bins at fixed collection points
  • No lifter: manual loading for transfer work only

Clean operation

  • Side or rear leachate tank under the hopper
  • Reduces dripping on the road during transport
  • Compact 4x2 chassis for narrow streets and residential areas

Delivery

Levertijd en export

  • Productietijd ongeveer 40 dagen
  • Ongeveer 15 dagen als het chassis op voorraad is
  • Photos and videos of your truck before shipment
  • Offerte en configuratie binnen 48 uur

Heb je meer capaciteit nodig? Bekijk dan de SHACMAN 8 m³ compactor, de ISUZU GIGA 15 m³ compactor, of bekijk alles compactor garbage trucks.

fout: Inhoud is beschermd!
Neem contact op