Trang chủ / Sản phẩm / JAC 4x2 5 m³ Compactor Garbage Truck
XE ĐẶC BIỆT ĐƯỢC SẢN XUẤT THEO YÊU CẦU

JAC 4x2 5 m³ Compactor Garbage Truck

Compact rear-loader garbage truck on a JAC 4×2 chassis: 5 m³ arc-shaped Q345 steel body, push plate with back pressure for two-way compaction (about 1:2 to 1:3), 16 MPa hydraulics with PLC control, and a 109 hp HFC4DA1-1B diesel engine on a 3308 mm wheelbase.

Các tùy chọn: LHD hoặc RHD, công suất động cơ và tiêu chuẩn khí thải phù hợp với thị trường của bạn.

Rear loader: 240 L / 660 L bin lifter, bucket, swing arm or manual loading, chosen to match your collection method.

Tài liệu xuất khẩu: Giấy chứng nhận phù hợp kỹ thuật của xe, giấy chứng nhận khung gầm, chứng nhận CCC và báo cáo thử nghiệm tại nhà máy đều có sẵn cho từng chiếc xe tải. Chào đón các đại lý và đại diện — Trở thành đại lý của chúng tôi.

5 m³ Body volume
109 hp Công suất động cơ
16 MPa Working pressure
Chỉ mang tính chất tham khảo. Các thông số kỹ thuật cuối cùng về khung gầm và thân xe sẽ được xác nhận cho từng đơn hàng.
YÊU CẦU BÁO GIÁ THEO YÊU CẦU

Thông số kỹ thuật khung gầm và thân xe

🚛 Khung gầm

Khung gầm JAC, 4x2
Khoang lái Row-and-a-half cab
Động cơ HFC4DA1-1B diesel, 2771 cc, 109 hp
Hộp số LC5T255M3, 5-speed manual
Chiều dài cơ sở 3308 mm
GVW 4480 kg
Chassis weight 2330 kg
Axle capacity 2000 kg front / 5000 kg rear
Lốp xe 7.00R16, dual rear tyres
Hệ thống phanh Air brakes
Hệ thống lái Hệ thống trợ lực lái
Thiết bị trên cabin Air conditioning, power windows; central locking optional
Tùy chọn LHD hoặc RHD; công suất động cơ và tiêu chuẩn khí thải có thể tùy chọn

⚙️ Thân máy nén

Body volume 5 m³
Nội dung Arc-shaped compactor body
Steel WISCO Q345 high-strength manganese steel
Độ dày tấm Side / floor 4/5, 3/4 or 3/3 mm
Compaction Push plate with back pressure, two-way compaction
Compression ratio About 1:2 to 1:3
Leachate tank Side or rear sewage tank under the hopper
Working pressure 16 MPa
Hydraulics Changyuan or Wanye gear pump, Zhongmei valves and cylinders
Control PLC with CAN bus, one-key cycle
Rear loader Bin lifter, bucket, swing arm or none (optional)

Compaction & Hydraulics

Compactor body

  • Arc-shaped body resists deformation under load
  • WISCO Q345 high-strength manganese steel
  • Built-in push plate with back pressure squeezes waste tight
  • Compression ratio of about 1:2 to 1:3 carries more waste per trip

Hydraulic system

  • Changyuan or Wanye gear pump
  • Zhongmei multi-way valve and cylinders
  • Rated working pressure 16 MPa

Electrical control

  • PLC control with CAN bus
  • Manual, single-cycle or multi-cycle operation
  • Controls in the cab and at the rear
  • Wireless remote control (optional) for unloading and draining

Rear Loading Options

Choose by collection method

  • Bin lifter for 240 L / 660 L plastic bins, the most common choice for housing estates
  • Bucket type (open or fully sealed) for loose waste
  • Swing arm for large steel bins at fixed collection points
  • No lifter: manual loading for transfer work only

Clean operation

  • Side or rear leachate tank under the hopper
  • Reduces dripping on the road during transport
  • Compact 4x2 chassis for narrow streets and residential areas

Giao hàng

Thời gian giao hàng & xuất khẩu

  • Thời gian sản xuất khoảng 40 ngày
  • Khoảng 15 ngày kể từ khi khung gầm có sẵn trong kho
  • Hình ảnh và video về xe tải của bạn trước khi giao hàng
  • Báo giá và cấu hình trong vòng 48 giờ

Cần thêm dung lượng? Hãy xem SHACMAN 8 m³ compactor, cái ISUZU GIGA 15 m³ compactor, hoặc xem tất cả compactor garbage trucks.

lỗi: Nội dung được bảo vệ !!
Liên hệ với chúng tôi