الصفحة الرئيسية / المنتجات / شاحنة نفايات مضغوطة من طراز JAC 4x2 سعة 5 م³
مركبات خاصة مصنوعة حسب الطلب

شاحنة نفايات مضغوطة من طراز JAC 4x2 سعة 5 م³

Compact rear-loader garbage truck on a JAC 4×2 chassis: 5 m³ arc-shaped Q345 steel body, push plate with back pressure for two-way compaction (about 1:2 to 1:3), 16 MPa hydraulics with PLC control, and a 109 hp HFC4DA1-1B diesel engine on a 3308 mm wheelbase.

الخيارات: LHD or RHD, engine power and emission standard to suit your market.

Rear loader: 240 L / 660 L bin lifter, bucket, swing arm or manual loading, chosen to match your collection method.

وثائق التصدير: تتوفر شهادة مطابقة المركبة، وشهادة الهيكل، وشهادة CCC، وتقرير الاختبار المصنعي لكل شاحنة. نرحب بالوكلاء والموزعين — كن موزعًا لدينا.

5 m³ Body volume
109 hp Engine power
16 MPa Working pressure
تُعد هذه التكوينات إرشادية فقط. يتم تأكيد المواصفات النهائية للهيكل والجسم لكل طلب على حدة.
اطلب عرض أسعار مخصصًا

مواصفات الشاسيه والهيكل

🚛 الهيكل

الهيكل JAC, 4x2
كابينة Row-and-a-half cab
المحرك HFC4DA1-1B diesel, 2771 cc, 109 hp
علبة التروس LC5T255M3, 5-speed manual
قاعدة العجلات 3308 mm
GVW 4480 kg
Chassis weight 2330 kg
Axle capacity 2000 kg front / 5000 kg rear
الإطارات 7.00R16, dual rear tyres
الفرامل Air brakes
التوجيه نظام التوجيه المعزز
Cab equipment Air conditioning, power windows; central locking optional
خيارات LHD or RHD; engine power and emission standard optional

⚙️ Compactor Body

Body volume 5 m³
النص الرئيسي Arc-shaped compactor body
Steel WISCO Q345 high-strength manganese steel
سماكة اللوحة Side / floor 4/5, 3/4 or 3/3 mm
Compaction Push plate with back pressure, two-way compaction
Compression ratio About 1:2 to 1:3
Leachate tank Side or rear sewage tank under the hopper
Working pressure 16 MPa
Hydraulics Changyuan or Wanye gear pump, Zhongmei valves and cylinders
Control PLC with CAN bus, one-key cycle
Rear loader Bin lifter, bucket, swing arm or none (optional)

Compaction & Hydraulics

Compactor body

  • Arc-shaped body resists deformation under load
  • WISCO Q345 high-strength manganese steel
  • Built-in push plate with back pressure squeezes waste tight
  • Compression ratio of about 1:2 to 1:3 carries more waste per trip

Hydraulic system

  • Changyuan or Wanye gear pump
  • Zhongmei multi-way valve and cylinders
  • Rated working pressure 16 MPa

Electrical control

  • PLC control with CAN bus
  • Manual, single-cycle or multi-cycle operation
  • Controls in the cab and at the rear
  • Wireless remote control (optional) for unloading and draining

Rear Loading Options

Choose by collection method

  • Bin lifter for 240 L / 660 L plastic bins, the most common choice for housing estates
  • Bucket type (open or fully sealed) for loose waste
  • Swing arm for large steel bins at fixed collection points
  • No lifter: manual loading for transfer work only

Clean operation

  • Side or rear leachate tank under the hopper
  • Reduces dripping on the road during transport
  • Compact 4x2 chassis for narrow streets and residential areas

التسليم

مدة التسليم والتصدير

  • مدة الإنتاج حوالي 40 يومًا
  • حوالي 15 يومًا عندما يكون الهيكل متوفرًا في المخزون
  • Photos and videos of your truck before shipment
  • تقديم عرض الأسعار وتحديد المواصفات في غضون 48 ساعة

Need more capacity? See the SHACMAN 8 m³ compactor, ، الـ ISUZU GIGA 15 m³ compactor, ، أو تصفح الكل compactor garbage trucks.

خطأ: المحتوى محمي !!!
تواصل معنا